Store Categories
Shopping Cart
The cart is empty
MagicGizmo Login
Idea for Performance Table
- JimRoberts
- Topic Author
- Offline
Less
More
- Posts: 16
- Thank you received: 0
15 years 10 months ago #142
by JimRoberts
Idea for Performance Table was created by JimRoberts
While it's not apparatus it is an idea for a utility.
As some of you might know, on the day after Christmas of '07 my wife were plowed into by a drunk driver. Both of us got walkers out of the whole mess. Well, during cleaning for this past Christmas, mine resurfaced. As I looked at it the ides struck me that it could be made into a performing table. It's light weight and flattens nicely.
Right now I am experimenting with different size tops as there is a stability issue as the top gets wider so I may need to figure out some kind of bracing depending on the size top I settle on.
Will keep you posted on my progress.
As some of you might know, on the day after Christmas of '07 my wife were plowed into by a drunk driver. Both of us got walkers out of the whole mess. Well, during cleaning for this past Christmas, mine resurfaced. As I looked at it the ides struck me that it could be made into a performing table. It's light weight and flattens nicely.
Right now I am experimenting with different size tops as there is a stability issue as the top gets wider so I may need to figure out some kind of bracing depending on the size top I settle on.
Will keep you posted on my progress.
Please Log in or Create an account to join the conversation.
15 years 9 months ago #143
by mattr
Magicgizmo.com administrator
Replied by mattr on topic Re:Idea for Performance Table
Sounds like an interesting idea, post some pictures of your project when you have some....
Magicgizmo.com administrator
Please Log in or Create an account to join the conversation.
- james graham
- Offline
- Junior Member
Less
More
- Posts: 30
- Thank you received: 0
14 years 5 months ago #909
by james graham
Replied by james graham on topic Re:Idea for Performance Table
The electrical area in your hardware store will have anchor clips for EMT tubing (conduit)... A few of these with a wing nut may make a good clip to attach the top surface securely. They also have some hammer in types that I have used to hold conduit pipes in place for cart axles, anchoring a larger pipe through which a smaller pipe passes.
Please Log in or Create an account to join the conversation.
Time to create page: 0.056 seconds